2005-2020 Toyota Tacoma 80" Bolt on Sliders with Kick Out

review
5
0
5
Your Price: $650.00
Minimum of 10 to 12 weeks lead time currently.
Part Number:1001-3

Choose Options

Model
2nd Gen
3rd gen 2016 + 4x4 ONLY [+$20.00]
Powder Coated Black
Powder Coated [+$225.00]
DOM
DOM Outer Rail Upgrade [+$150.00]

BAMF 80" Sliders fit the double cab short bed, as well as access cabs.


BAMF’s number one selling slider configuration, we have created its own part number and built them in large batches to cut lead times and pricing.  The only options you get to select are Model, Bare Metal or Power Coated, and DOM or HREW mounted at 20 degrees. If you want more options you will need to go with our built to order Toyota Tacoma sliders. These have a 6-month minimum lead time and can be found here.


Our bolt on design for 2005 to 2020 trucks is 100% bolt on with no drilling and is the strongest "true bolt on available" with 6 to 8 .500" grade 8 bolts for each slider holding them (dependent on the truck). With three no drill attachment points on the bottom side of the frame, you won't find any other company offering that!

 

Specs:

Built from 1.75" .120 wall HREW or DOM CNC plasma cut & notched, bent on a computer programmable tube bender and fully welded to a CNC laser cut 2"x 2" 3/16th formed legs, with an integrated gusset and 3/16th laser cut frame plates. With kick out they will stick out 7.5" from the square tube & about 16" from the frame. Just sticking out past the tire with a wheel BS of 4.5" and a 285 wide tire.

 

Shipping:

Shipping charges will be an additional invoice sent at the time of shipping. The Shipping calculator cannot calculate shipping on sliders due to the numerous options offered. Estimated shipping to the West Coast ranges from $135 to $170, when shipped to a home address. Estimated shipping to the Mid-West and East Coast are around $175 to $200 shipped to a home address. Florida and Hawaii are similar in cost with 80" bolt on sliders running upwards to and above the $250 to $300 range shipped to a home address.

 

BAMF ships via XPOLogistics "LTL Freight" for ALL sliders. They will ship directly to your home. If you have a business address it's $25 less to ship. All freight is quoted without a lift gate service. If you are unable to offload the sliders yourself from the truck, there is an additional $165 dollar lift gate fee. 


To find a XPOLogistics Hub click here.


These are all just base line numbers, shipping costs will vary.

 

Don't know what DOM is find out here

 


Installation Instructions:

Now that you have a set of BAMF 100% true bolt on sliders for the DCSB and ACLB it's time to install them. It's very simple for two guys to install them in under 1 hour. If installing alone expect at least two or more hours. 


20150406_173456_1.jpg

20150408_171936_1.jpg


If you ordered bare metal sliders, you will need to coat them before installing them. If you bought powder coated sliders, you will only need to spray the welded washers with primer and paint so they don't rust. We don't powder coat them as it would drive up the cost of the powder coating.

 

Hardware: The hardware accompanying the sliders are listed below. Please take inventory and let us know if anything is missing. 

(2) long bars with welded nuts
(2) short bar with one nut
(14) 1/2x1.5" grade 8 bolts 
(22) 1/2" grade 8 thick fender washers
(8) 1/2" grade 8 locking nuts
(2) 3/8thx1.5" grade 8 bolts
(2) 3/8th grade 8 nuts 
(4) 3/8 grade 8 washers

 

Note, some hardware is not used for some year trucks as Toyota has removed and added holes over the years. The main thing is that you have 3 connection points on the bottom side of the frame which all years have these holes. 



20170624_084605-01.jpg


Tools needed:
(2) Jack stands
(1) 3/4" wrench
(1) 3/4" socket and wrench
(1)10mm deep lug socket 2015 + only
(1) 12mm wrench
(1) 14mm wrench
(2) 9/16 wrenches

Small screwdriver or thin pointy object (more on that later).

This is the first thing you need to do when installing the sliders. You insert this into the Trans crossmember before the sliders are set into place. You cannot install this washer with them on the truck. 




This is where the washer above is placed. Take your screwdriver and align the nut with the hole so you can get the bolt started. If your fingers are small enough, you can use one to help you move the washer around in the right position. Place the bolt into the hole that fits your truck one will be covered depending on if you have 2wd or 4wd.


20151117_155350.jpg



The first bolt is this one on the lower section of the frame, which is in between the carrier bearing crossmember. Take your 14mm and remove it. Note we have seen the frame move apart about a 1/16th when this bolt is removed, making it hard to put back in. If this happens, you can take a ratchet strap around both sides of the frame to pull it back. Don't try and force it in, as you can cross thread it. 

 

Next you need to remove the bolt on the side of the frame and move the bracket out of the way for the sliders.

 

The picture shown is a 2016. The 2015 and some 2014's have this same box on the passenger side frame, disregard this if you don't have this box on the outside of the frame rail. There are two m6 bolts and two m8 bolts. Remove the m6 bolts with the 10mm socket, then remove the two m8 bolts with the 12mm wrench.

 

For all other trucks there is one m8 bolt. Remove it with the 12mm wrench, then pull the bracket out of the way and set the sliders into place. NOTE the lower bolt needs to be started first.  It's a tight fit once the sliders are installed, so the lower factory bolt is installed first.

 

After that you can reinstall the m8 bolts and bracket. If you have the black box, you just move it forward one hole and bolt it in with only one bolt. Then place the cover back on with the m6 bolts.



20151117_155401.jpg

The black box with cover removed and replaced one hole forward.







Next you need to bolt up the front leg. The frame is boxed here, so we made a welded part with two top lock nuts on it to make your life easier. All you need to do is get the bolts started with the bracket, then you won't need a wrench on the back side. 

 


20151117_155502.jpg 

20151117_155509.jpg


Next you place a washer on the 1/2" bolts and put them in every hole they fit into, with one of the fender washers and lock nut on the back, leave loose until all bolts are in place.


20151117_155741.jpg

This bracket can be removed to fit your arm into the driver side boxed section.


20151117_155854.jpg


On the driver side some of the brake lines are in the way you will need to move them ever so slightly to get the nut to clear.


20151117_155906.jpg


In addition, with the 2016, this box needs to be removed and a bolt installed backwards in the frame with it sticking out as shown in the pictures below.


20151117_160624.jpg 




Once all your 1/2" bolts are in place, install the 3/8th bolt into the very rear lower hole with a nut and washer on both sides.

NOTE the driver side is very tight so going in from the front of the tank with your hand is the best way to do it. You may need someone with small hands to help out. We have also noticed on the 18 and 19 models the frame has mutable stacked sheets stacked on top and is not in line with each other, preventing the bolt from passing through the hole. Drilling may be required to make that bolt fit. 

 




It’s now time to tighten everything down. Start with all three lower bolts, then continue with the remaining bolts. All the bolt need to be good and tight, but if you must, you can torque them to the factory bolt spec if you can locate (we are still looking for it and will update when we can) the 1/2" bolts 80 ft lbs and the 3/8th to 33ft lbs.

Now that your sliders are installed go out and use them up as they were designed for!


20151117_161314.jpg
5 Stars
best bolt-on's
Just wanted say nice work on the fabrication! Straight forward assembly, just follow the instructions posted on-line.
Did you find this helpful?  7 of 7 Found Helpful
Reviewed by: (Verified Buyer)  from San Diego. on 7/22/2018
5

Related Items

Recently Viewed Items