After building Toyota parts for a decade. BAMF decided to buy a 2020 JEEP Gladiator to jump into the JEEP market. In the Toyota world we are known for making stout products that can take a punishment. Our JEEP products will be the same.
Thankfully, JEEP wranglers from the JK/JL to the current JT Gladiator have the same mounting points for the front bumper.
We only use American made steel, and proudly manufacture everything 100% in-house. Even our powder coating is done in-house, giving you a superior finished product. We use a thermoplastic coating, with a reverse texture on our products that can be field repaired with a torch or heat gun - "yeah you can fix our powder coat with FIRE".
All of our JEEP bumpers come powder coated and ready for install.
The winch plate and mounting points on our bumpers are made from .250" HRPO A-36 mild steel and are the bumpers main structure. No need to order a bolt on winch plate for the winch, Our winch plate is the bumper. The recovery points are Laser cut .750" SSAB USA plate steel that are tumbled in ceramic media for 18 hours to soften the edges, then welded 5" along the winch plate with the pulling point near center of the frame rails. The winch plate is recessed down between the frame rails allowing proper air flow behind the grille.(NOTE) the winch opening is made for the WARN Evo size winches very tightly. staying within those specs is recommended, the larger profile winches may not fit. The outer skin is .188" HRPO plate steel with a recessed hawse fairlead location and cube light pockets. The bumper measures 45" at is widest point and tapers in to 41" and the bottom corners allowing for 40" tires at stock height (if you can clear the rest of the stuff). It can be ordered with or without a hoop.